Downspout Boots

When ordering, please specify:

Material - Cast Iron or Cast Aluminum
Style of Downspout - Example - "B25A"
What length downspout boot is required
What size downspout is fitting into the top of the boot
What size outlet is desired to attach to your drainage system

BarryCraft’s gray cast iron and cast aluminum downspout boots are heavy duty and should last virtually the life of the building.

BarryCraft downspout boots are excellent in areas subjected to vehicular traffic where light duty downspouts can be easily damaged. Our downspout boots are also excellent in public areas such as around buildings or schools where pedestrian traffic can vandalize light duty downspouts.

Cast iron downspout boots will be painted primer gray.

Cast aluminum downspout boots will have a natural sand cast finish.

(Click on images to enlarge)

B25A	B25B

Rectangular downspout to round discharge outlet is designed to empty straight into a soil pipe. This downspout boot is also designed with an offset from the building to allow the pipe hub to fit around the downspout boot. They may be used with PVC pipe. Check clearances in the table below.	Rectangular downspout to rectangular discharge outlet is designed to empty into a trench or gutter box at a 90° turn.

Standard Lengths for B25 and B26 Series Downspout Boots
1'	1'6"	2'	2'6"	3'	3'6"	4'	4'6"	5'	5'6"	6'

3" x 3"
3" x 4"
3" x 5"
4" x 4"
4" x 5"
4" x 6"
5" x 5"
6" x 6"

Downspout Boots Style 25A Standard Outlets Available Other sizes may be available upon request for the B25A downspout boots.
Downspout Size A x B	Outlet I.D. C	Outlet O.D. D	Offset E
3" x 3"	3"	4"	2-1/2"
3" x 4 "	4"	4-7/8"	2-1/2"
3" x 5 "	5"	6"	2-3/8"
4" x 4"	4"	4-7/8"	2-1/4"
4" x 5"	4"	4-7/8"	2-1/2"
4" x 5"	5"	6"	2-1/8"
4" x 6 "	4"	4-7/8"	1-1/2"
4" x 6 "	6"	6-7/8"	1-1/2"
5" x 5"	6"	7"	2-1/2"
6" x 6"	6"	7"	1-1/4"

B25C	B25D

Rectangular downspout to round discharge outlet is designed to empty into a vitrified, concrete or soil pipe with a 90° turn. Downspout outlet is designed to fit into the hub of a standard soil pipe or PVC pipe. Call to verify diameter clearances.	Rectangular downspout to rectangular discharge is designed to empty onto a splash block or paved area.

Standard Lengths for B25 and B26 Series Downspout Boots
1'	1'6"	2'	2'6"	3'	3'6"	4'	4'6"	5'	5'6"	6'

B26A	B26B

Round downspout to a round discharge is designed to empty straight down into a soil pipe. This downspout boot is also designed with an offset from the building to allow the pipe hub to fit around the Downspout boot. Standard offset 21⁄2". PVC pipe may be used. Call to check clearances.	Round downspout to a round discharge to empty into a soil pipe at a 90 turn. The outlet is designed to fit into the hub of a standard soil pipe. PVC pipe may be used. Call to check clearances.

Standard Lengths for B25 and B26 Series Downspout Boots
1'	1'6"	2'	2'6"	3'	3'6"	4'	4'6"	5'	5'6"	6'

Standard inside diameters for B26 series.

3" dia.

4" dia.

5" dia.

6" dia.

Round downspout to a round discharge is designed to empty onto a splash block or paved area.