Barry Pattern & Foundry

Miscellaneous

(Click on images to enlarge)

B-1872

B-1872 - Tank Type Frame and Cover
Table Dimensions in Inches
Catalog No. A C E F
B-1872-A 14-1/2 x 14-1/2 12 x 12 16 x 16 4
B-1872-B 21 x 21 18-1/2 x 18-1/2 24 x 24 4
B-1872-C 24 x 24 21-1/2 x 21-1/2 28-1/2 x 28-1/2 5
B-1872-D 27 x 27 24 x 24 30 x 30 5
B-1872-E 33 x 33 30 x 30 36 x 36 5
B-1872-F 39 x 39 36 x 36 42 x 42 6
B-1872-H 51 x 51 48 x 48 54 x 54 6

 


 

B-1979 A
Manhole Riser

B-1979 A

Take this Manhole Riser and simply "dop-on" the Riser to the existing frame and repace the lid. You have, with little labor and time consuming cost, raised the manhole the desired height in a matter of minutes. Each unit of cast iron is built to your own specifications. You do not have to disturb the existing manhole frame. Minimum riser height equals the cover thickness plus 1/2".

Specify:
"A" - The diameter of the existing manhole cover.
"B" - The thickness of the present manhole cover.
"C" - The height the manhole is to be raised.

 


 

Cast Iron
Manhole Steps

Cast Iron Manhole Steps

 


B 4979
Cast Iron and Aluminum Foundation Vents

Cast Iron and Aluminum Foundation Vents

Height Length
8" 10" - 12" - 14"
12" 12" - 16" - 18" - 24"
16" 24"
18" 24"

 



B 4988
Cast Aluminum Brick Vents

 

Cast Iron and Aluminum Foundation Vents

Furnished in aluminum only. Designed with a louvered face to prevent driving rain from entering. Made with integral water stop inside the casting and a continuous drip above the face. Also a drip on the bottom to prevent staining face of wall.

Advantages: Water drips across top and bottom to prevent rain from entering. Barry Brick Vents present a neat appearance - no projections. Aluminum screen directly behind the face of the louvers prevents insects from entering.

Installation - Barry Brick Vents are built in by the mason as he builds the wall, with the louvered face to the outside and the duct or flue to the inside.

A 2-3/8 "x 8" x 4" 1 brick
B 2-3/8" x 16-1/2" x 4" 2 brick
C 4-7/8" x 8" x 4" 2 brick
D 4-7/8" x 12-1/4" x 4" 4 brick
E 4-7/8" x 16-1/2" x 4" concrete block
F 7-7/8" x 12-1/4" x 4"  
G 7-7/8" x 16-1/2" x 4"  
H 7-7/8" x 25-1/4" x 4"  

Brick and Concrete Block

There are 2" and 4"load bearing duct extensions available. These are grooved and slip on to the brick vents (and each other) so that the depth can be built up to the desired thickness. Galvanized sheet metal extensions are available to meet your specifications.

 


 

Stadium Seat Brackets

Available in both Cast Iron and Aluminum. Lends strong support. If galvanizing is desired, please specify.

Stadium Seat Brackets

 


 

Plinth

B-7001 - Plinths

Cast Iron or Aluminum Column Bases.
Call for quotes on custom designs.

Catalog Number Dimensions in Inches
B-7001-A 3-1/2 x 3-1/2 x 1-1/2
B-7001-B 4 x 4 x 1-1/2
B-7001-C 4-1/2 x 4-1/2 x 1-1/2
B-7001-D 5-1/2 x 5-1/2 x 1-1/2
B-7001-E 8 x 8 x 1-1/2
B-7001-F 10 x 10 x 1-1/2
B-7001-G 12 x 12 x 1-1/2
B-7001-H 14 x 14 x 1-1/2
B-7001-I 16 x 16 x 1-3/4
B-7001-J 17 x 17 x 1-3/4
B-7001-K 18 x 18 x 1-3/4
B-7001-L 19 x 19 x 1-3/4
B-7001-M 20 x 20 x 1-3/4
B-7001-N 21 x 21 x 1-3/4
B-7001-O 22 x 22 x 1-3/4
B-7001-P 23 x 23 x 1-3/4
B-7001-Q 24 x 24 x 1-3/4
B-7001-R 24 x 24 x 4
B-7001-S 26 x 26 x 4
B-7001-T 28 x 28 x 4
B-7001-U 32 x 32 x 4
B-7001-V 36 x 36 x 4
B-7001-W 40 x 40 x 4