Barry Pattern & Foundry

Cast Abrasive Thresholds

Short form specifications

Thresholds will be BarryCraft Alumatread or Feratread style as manufactured by Barry Pattern & Foundry Co., Birmingham, AL. Threshold surface will have silicon carbide abrasive, a minimum of
2-1/4 ounces per square foot to a minimum depth of 1/32 of an inch. All castings will be of uniform quality, free from blow holes, shrinkage defects, swells, cracks or other defects. Threshold will be true to pattern. Castings will be free of fins, burrs and slag. Cast iron will have one coat of black paint. Aluminum will have a natural sand cast finish.

Standard drilling will be for 1/4" flat head machine screws in one or two rows dependent on width. The standard hole diameter is 5/16".

Standard fastener will be tapcon anchor screws, or expansion shields. Ends of thresholds may be notched to your detail.

Saddle types

Standard widths: 4", 5", 6". Other widths to order.

Standard surfaces: Fluted abrasive.

Other surfaces available: Cross-hatched or plain must be specified.

Stop types

Standard widths: 4", 5", 6". Other widths to order.

Standard surface: Plain abrasive.

Other surfaces available: Cross-hatched or fluted abrasive must be specified.

Profiles and installations

(Click on images to enlarge)

Style B-12 Style B-14 Style B-15 Style B-15S
Style B-12
for installation
as stop at door
bottom in existing
concrete floor.
Style B-14
may be installed
on level floor for
new or existing
door opening.

CAD DrawingGet DWG Viewer
Style B-15

spans joint between sill and floor covering.

Style B-15S installed on existing surface in frame openings.

Saddle types Stop types
Style B-10T
CAD Drawing Get DWG Viewer
Style B-1OT standard height is 3/8 " for 4",
5", 6" widths. Height may vary for other widths.
Style B-12
CAD Drawing Get DWG Viewer
Style B-12
Style B-11
Style B-11 standard height is 1/2" for 4", 5", 6" widths.
Style B-13
CAD Drawing Get DWG Viewer
Style B-13
Style B-14
CAD Drawing Get DWG Viewer
Style B-14 standard height is 3/8 " for 4", 5", 6" widths. Height may vary for other widths.
Style B-15S
CAD Drawing Get DWG Viewer
Style B-15S
Style B-15
Style B-15 standard height is 1/2 " for 4", 5", 6" widths.
Cast Aluminum B-15
Style B-15M
Style B-15M standard height is 1/2 " for 4", 5", 6" widths.